Gold FitForPower

OnTheGo

Road/Tri  Conversion

Bronze

PrePurchase

The Gold FitForPower session is the ultimate!  This session incorporates CompuTrainer's SpinScan in conjunctions with Retül 3D motion capture fit session. Pedal stroke information; wattage (power output), power balance and pedal stroke efficiency is shown in real time. This information is evaluated for a quick* pedal technique instruction. You will see improvement instantly.


Cost: $285, includes follow-up session, as needed. 

2nd bike fitting, done back to back, $160. If separate session, $185. 

Time: 4 to 5 hours, could be a bit more or less.

*PedalPower is an in depth pedaling stroke instruction session.

Silver

Gold

 

  1. •Review of initial Retül data captures.

  2. •Adjustments and equipment recommendations.

  3. •Zin reports.

  4. •Retül Fit reports.

  5. •Bike and Rider fit definition.

  6. •Photographs/videos, as necessary.

  7. •Data sheets and reports emailed within two days after completing of fit session.

  8. •Guarantee: Follow-up session within the first three weeks of the initial fitting, as necessary.

What To Bring to Your FitForPower Session: 

  1. •Bike, rear tire must have plenty of tread (a non-racing compound is suggested).

  2. •Bike shoes (IMPORTANT! Cleats must be in proper working/adjustable condition).

  3. •Proper cycling attire.

  4. •Small towel.

  5. •Hydration fluid, energy gel/bar... fuel (Gu Energy products will be provided).

  6. •Skin must be smooth and clean (no lotion).

  7. •Center of wrist, elbow (at funny bone), and center side of knees should be free of hair.

  8. •Ok to bring additional stems (length and angle), saddles, seat posts, cleat wedges and cleat shims.

  9. •Optional: Aero helmet, will discuss if it's the proper model for you and why.

  1. •Detailed rider interview.

  2. •Comprehensive body analysis, includes flexibility and body structure review.

  3. •Foot, cleat and shoe analysis. Adjustments and recommendations, as necessary.

  4. •Before and After Zin (digital mapping) of bike.

  5. •Warm up session.

  6. •Pedal stroke analysis and instruction.
    (an abbreviated PedalPower session, which is a
      session unto itself).

  7. •Real time data captures w/Retül's 3D dynamic motion capture, left and right sides.

A FitForPower bike fit will allow you to generate optimal power and perform with the least amount of strain on the body.

Typical results show an average increase of 8-20% in power output, individual results will vary*

To Schedule an Appointment:

  1. •Send us an email or call, with a few day and time options that work best for you.

  2. •We do our best to accommodate based upon your schedule.

  3. •The Lab is open weekdays, weekends... just about any time of day.

Session Includes: 

Invest In yourself first!